PRO-Equipment, Inc.
262-513-8801 | USA

Headworks Products

ICP RECEIVING STATIONS | Pre-Treatment

ICP STATIONS
Integrated Coarse Pretreatment Receiving Station

Model ICP | Model ICPE

Model ICP
The Integrated Coarse Pretreatment Receiving Station (ICP), is an assembly of multiple wastewater treatment unit processes strategically designed into a single pre-packaged system. The ICP Station is primarily used to pre-treat septage at wastewater treatment plants. The ICP Station can also be used as a complete Headworks package for smaller treatment plants. This Integrated Receiving Station saves footprint space, cost and construction time.

This single container Integrated Treatment Station efficiently, separates, washes and transports grit, grease and screenings from raw wastewater. The ICP Station components consist of a tank, self-cleaning screen, screenings press, grit screw conveyors and control panel. This package is designed for above ground installation.

Model ICPE
The ICPE Receiving Station is a smaller economy version of the ICP Station. This economy model is designed to simply remove screenings and can be mounted directly on any hard surface.

The ICP Station is fully automated and can be controlled through a Septage Hauler Station. It can also be operated manually. The frequency and time of operation of individual components can be adjusted in the control panel. It is suitable for installation indoor or outdoors and available with heat tracing and insulation that allows for use at below freezing temperatures.

OPTIONAL FEATURES

  • Tank Aerator for increased effectiveness in the removal of grit and organics
  • Heater Unit Casing for below freezing outdoor applications
  • Collection and transport of FOG

OPERATION PRINCIPLES

Wastewater flows into an inlet flange connection, into the head end of a longitudinal tank, through a self-cleaning screen, and into the grit and FOG section of the tank before discharge. The removed screenings accumulate in the hopper of the screw compactor. The screenings are washed clean and compacted into the discharge tube. In the tank, grit is separated and settles towards the tank bottom where there is a screw conveyor installed. The grit is transported to a hopper from which it is further transported upward and dewatered by the inclined screw conveyor to a container.

TECHNICAL PARAMETERS

  • Material: Stainless Steel (300 Series), plastics and rubber

FEATURES

  • Small Footprint
  • System Prepackaged
  • Inside or Outdoor Applications
  • Heating Option for freezing temperatures
  • Low Cost
  • Simple Installation
  • Optional Grit Washing

APPLICATIONS

  • Ideal for both municipal and industrial use
  • Wastewater Treatment Plants (WWTP) Headworks
  • Upgrading Small (WWTP)
  • Septage Receiving Pre-treatment
  • Water Intake Debris Removal
Integrated Pre-Treatment Receiving Station
ICP TYPICAL SPECIFICATIONS
FLOW RATE: 25, 50, 100, 150 Is -1 (400, 800, 1600, 2400 gpm)
SUPPLEMENTARY WASH WATER: 0.8 Is -1 (13 gpm) at 0.5 MPa (7.4 psig) - at intervals
OPERATING CONDITIONS: Indoor - inside a building
Outdoor - down to -20°C (-4°F) with heating option
OPERATING CYCLE: Operational intervals can be adjustable on the control panel
POWER INPUTS:  
PRO-GUARD SCC 0.12-0.25 kW, 460V
PRO-PACTOR LSP 1.5 kW, 460V
ELECTROMAGNETIC VALVES 2x30W, 230V
GRIT-GUARD SEPARATOR / SCREW CONVEYOR 2x1.1 kW, 460W
COLLECTION OF FATS 350W, 230V
TRANSPORT OF FATS 0.55 kW, 460V
HEATING 3.5-6kW, 230V
Note: Parameter ranges above are typical and can differ for customized ‘ICP’ Units
ICPE TYPICAL SPECIFICATIONS
FLOW RATE: 3, 5, 7, 10 Is -1 (50, 80, 110, 160 gpm)
SUPPLEMENTARY WASH WATER: 1 Is -1 (11 gpm) at 0.3 MPa (4.5 psig) - at intervals
OPERATING CONDITIONS: Indoor - inside a building
Outdoor - down to -20°C (-4°F) with heating option
OPERATING CYCLE: Operational intervals can be adjustable on the control panel
POWER INPUTS:  
SVS DRIVE 0.18 kW (1/4 HP)
SP SCREW 1.1 kW (1-1/2 HP)
SOLENOID VALVE 30W / 220V
OPTIONAL HEATING UNIT 2100W / 120V
Note: Parameter ranges above are typical and can differ for customized ‘ICPE’ Units
ICP

Installation

INSTALLATION OF A WWTP SEPTAGE RECEIVING STATION

Application: Septage and Leechate

Location: Dunnville, ON CANADA

North America
ICP

Installation

INSTALLATION OF A WWTP SEPTAGE RECEIVING STATION

Application: Septage

Location: St. Claire, ON CANADA

North America